Instruction of Inkjet Transfer
This is an original photo, you can edit the image, do art processing, and add letter, frame or other special effects by using graphic software.
*Using Inkjet printer prints your design, We recommend Epson C88,C88+, R260 (printing size 8" X 11"),or 1280(printing size 11" X 17").
We have Continuous Ink System (CIS), the system comes with 400ml ink, available for 250 sheet photo printing (letter size), equal to 60 cartridges,
You may buy a Epson printer from http://epson.com.
You can save huge money for the ink.

Printer set "Best photo", "glossy photo paper"," Gamma = 2.2"

printing image on dull side of the inkjet transfer.
Using hairdryer dry ink enough or it will influence the quality of image.
Place moving file on the surface of the transfer
* Protect image
* Easy cutting
* Easy to pick up image

There are two ways remove the background of  image

1) using a sharp knife cut along outline ,only cut the level soft film.
2) Using Cutter/Plotter
If you wanted cut image by cutter
* Save outline of the image as PLT file
* Run WL software. (optic eye function)
* place the blade to point referenced point
* cutter will cut along outline

The Cutter/Plotter can exactly cut along ontline.

　
Peel all undesired background.
Cut a piece moving film, pick up the letter and image.
Set heat press 180C(356F), 20S, heavy pressures.

Keep handle open when warm press

Place T-shirt, the put image on desired position.
　

　

　

　
Place Teflon sheet on top of transfer

When the temperature reached 180C, press handle down. the timer starts count, when hearing "BB,BB". lift up the handle.
Cold peel moving film.
An entire picture has been printed on the product that you need.
The transfer can apply any colors T-shirts.